Performance Quiet and balanced air motor for constant delivery There is minimal pulsation due to quick air motor change over at low air pressures Stainless-steel fluid section compatible with a wide range of materials including water-based paints Designed to eliminate dead zones for quick color changes Pulse-free for a superior finish Able to flush and prime at very low air pressures (0.6 bar/8.5 psi) Productivity Large foot valve to handle high viscosity materials up to 5,000 cPs – carbide seat Small fluid section, minimal material loss during color changes Closed construction decreases the risk of injuries and protects the lubricant from external contamination Leak indicator weep hole for fast visual inspection Easy rotating outlet fitting to fit various configurations Sustainability Stall-free Differential Air Motor won’t ice up Easy to service with direct access to the suction valve Single piece built-in cartridge with no dead zone Easy coupling for a quick disassembling Mobile seal located on the piston ensures the cleaning of the fluid section internal wall while the pump is in operation Low maintenance, no external air distributor assembly. 45% fewer parts vs competition Triple chrome-plated piston parts compatible with most materials Magnetic reversing valve to eliminate pump surge Reduced spare parts: 50% fewer parts vs competition Designation Value Unit: metric (US) Pressure Ratio 35 Maximum Fluid Pressure 210 (3000) bar (psi) Recommended Fluid Output 1500 (0.4 gal/min) cc/mn (cfm) Maximum Fluid Output 3000 (0.8 gal/min) cc/mn (cfm) Maximum Air Pressure 6 (87) bar (psi) Air Consumption 15 m³/h (cfm) Maximum Temperature 60 (140) °C (°F) Fluid Output at 30 cycles/mn 1.5 (0.4) l/min (gal/mn) Fluid Volume per Cycle 50 (0.013 gal) cc Free Flow Rate 5 (1.3) l/mn (gal/mn) Fluid Output at 15 cycles / mn 750 (0.19 gal/min) l/mn (gal/mn) Seal Packings PE UHMW Height 58.5 (23) cm (in) Width 23.5 (9.05) cm (in) Depth 23.5 (9.05) cm (in) Wetted Shares: Stainless Steel Weight 8 kg (lbs)
