MH-0060-LM10 Frame: Heavy-duty steel construction with steel base · Easy-lift handle for portability on the job site · Adjustable height angle for heat where you need it Components: One touch ignition and heat control for easy operation · 10-foot hose and regulator · High performance fan · Automatic shut-off if power is interrupted or flame is extinguished · Enclosed gas controls · Electronic ignition · Propane inlet connector – connects heater to propane tank via a supply hose Propane: Will operate on 20 lb. cylinder Heat Output: Variable BTUs For use in workshops, garages, construction sites and farms with proper ventilation. Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances. Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information. Important Notes: · Not for use in residential living areas or inadequately ventilated areas. · Proper ventilation required during operation. · Must be plugged into an approved standard electrical outlet for operation. Specifications Heat Output 40-50-60,000 BTU Hot-Air Flow 300 CFM Fuel Consumption 1.9/2.3/2.8 lb./hr. Max. Operating Hours 10.5 hours per required cylinder size AC Power 120 Volt/60Hz/Less than 1.0 Amp Motor Size 1/10 HP Fuel Propane Required Cylinder Size 20 lbs. Heating Area 1,500 sq. ft. Weights & Dimensions Net Weight 15 lbs. Shipping Weight 19 lbs. Length 18.1 in. Width 7.1 in. Height 13 in.
